资讯中心
INFORMATION CENTER
技术解决方案
首页 > 资讯中心 > 技术解决方案

Sun 4800外接D240不能从光驱启动

     发布时间:2017-04-24 

在给一台E6900重装系统的时候,遇到了不能从光驱启动的问题,在网上找到了这篇文章,解决了问题。 以下为转载的内容: 今天安装一台Sun 4800操作系统Solaris9。插入光盘后在OK提示符下boot cdrom报错,说找不到boot device 到Sun网站上去看了看,找到了解决方案(感觉明明就是一个bug): Document Audience: PUBLIC Document ID: 71504 Title: "ERROR: Can''t open boot device" booting CDROM or disk with Sun[TM] Dual FastEthernet / Dual SCSI PCI Card Synopsis: "ERROR: Can''t open boot device" booting CDROM or disk with Sun[TM] Dual FastEthernet / Dual SCSI PCI Card Update Date: Thu Sep 23 00:00:00 MDT 2004 Products: Sun Fire 6800 Server, Sun Fire 4810 Server, Sun Fire 4800 Server, Sun Fire 3800 Server, Sun Fire E25K Server, Sun Fire E20K Server, Sun Fire 15K Server, Sun Fire 12K Server, Sun Fire V1280 Server, Sun Fire E2900 Server, Sun Fire E4900 Server, Sun Fire E6900 Server Technical Areas: Boot, SCSI Host Bus Adapter (HBA), SCSI (Small Computer System Interface), OBP (OpenBoot PROM) Keyword(s):cauldron Problem Statement: A system is unable to boot CDROM or disk after configuring the boot alias of the DVD-Rom or disks of a D240 like a regular CDROM or disk connected to a SCSI card. The probe-scsi-all command shows the DVD-ROM at /ssm@0,0/pci@1d,700000/pci@1/scsi@2,1 at target 6, LUN 0, and shows the disks at /ssm@0,0/pci@1d,700000/pci@1/scsi@2,1 at targets 0 and 1. ok boot /ssm@0,0/pci@1d,700000/pci@1/scsi@2,1/sd@6,0:f ERROR: Can''t open boot-device ok boot /ssm@0,0/pci@1d,700000/pci@1/scsi@2,1/sd@0,0:f ERROR: Can''t open boot-device Resolution: The Sun Dual FastEthernet / Dual SCSI PCI Card uses "disk@X,X" instead of "sd@X,X" for its OpenBoot PROM (OBP) driver name. Some users may be confused by this, as they assume that the OBP driver name will always be the same as the Solaris driver name. This is not the case. When running the ''format'' command from Solaris, it reports the device path as "sd@X,X". This also adds to the confusion, as it is using the Solaris driver name in the device path. The correct method to allow for a successful boot is to use the device path as reported by the OpenBoot PROM (OBP), using the "show-disks" command. It should be noted that the show-disks command does not report the device SCSI Target and LUN details. Target and LUN details can be obtained from the "probe-scsi-all" command. This means you will need to add something like "@X,X" to the end of the device path supplied by "show-disks". For example: ok probe-scsi-all . . /ssm@0,0/pci@1d,700000/pci@1/scsi@2,1 Target 0 Unit 0 Disk FUJITSU MAP3367N SUN36G 0401 Target 1 Unit 0 Disk FUJITSU MAP3367N SUN36G 0401 Target 2 Unit 0 Processor Sun D240 1.09 Target 3 Unit 0 Processor Sun D240 1.09 Target 4 Unit 0 Removable Tape HP C5683A C005 Target 6 Unit 0 Removable Read Only device TOSHIBA DVD-ROM SD-M17111005 . . ok show-disks a) /pci@3d,700000/pci@1/scsi@2,1/disk b) /pci@3d,700000/pci@1/scsi@2/disk c) /pci@1d,700000/pci@1/scsi@2,1/disk d) /pci@1d,700000/pci@1/scsi@2/disk q) NO SELECTION Enter Selection, q to quit: q Using this information, and the Target / LUN details obtained from a probe-scsi-all, you can now construct the correct device path to boot from. ok reset-all ok boot /ssm@0,0/pci@1d,700000/pci@1/scsi@2,1/disk@6,0:f NOTE: Make sure that you execute ''reset-all'' before ''boot'' with "disk@X,X" at the end of the device path, otherwise you may not be able to boot and get the error: Data MMU Miss. Using "reset-all" will avoid the following scenario: ok boot /ssm@0,0/pci@1d,700000/pci@1/scsi@2,1/sd@6,0:f ERROR: Can''t open boot-device ok boot /ssm@0,0/pci@1d,700000/pci@1/scsi@2,1/disk@6,0:f Data MMU Miss Whilst this issue is most frequently encountered on the D240, as it is most frequently used boot storage for the Sunfire Midrange series of servers, the problem is not unique to the D240. This misconfiguration error can be seen on virtually any storage that can be connected to the Sun[TM] Dual FastEthernet / Dual SCSI PCI Card (e.g Sun StorEdge S1). The most important thing to remember is that, regardless of the controller type, the paths as reported by "show-disks" at the OBP are the paths you need to use when booting.

上一条】 【返回列表】 【下一条
北京恒通逸阳科技有限公司
电话:010-69614990 / 13810154229
地址:北京市海淀区双清路3号中太大厦5层35019-35021室
主营业务: Oracle Sun 服务器 ,IBM 磁带库 ,昆腾磁带库,DELL 磁带库
技术支持:博搜网络
版权所有 北京恒通逸阳科技有限公司  京ICP备17022292号-1
点击这里给我发消息